Dc Furnace Transformer

Dc Furnace Transformer

Our clients can avail from us efficient DC Furnace Transformers. Our DC Furnace Transformers are used in different purposes like chemical processes, power supplies for Magnetic Charger, battery charger, electroplating, anodizing, copper and silver refining and drawing large generator motor transformer etc. The Rectifiers and DC Furnace Transformers are designed for non-stop use and they can be air or and oil cooled.

Highlights of Our DC Furnace Transformers

  • Electronic parameter monitoring
  • Various feature & functions upon request
  • Highest rating available

The Electronic Controls Are Used For

  • Current density control
  • Voltage control
  • Temperature
  • Speed control


» Technical Details


Step Down Transformer A double wound transformer is used for supplying high current at low voltage for testing. Current Control A step less Auto Transformer is used for Controlling Output Current from Zero to Maximum. Input Voltage 230/415 Volts single/two/three phase 50Hz. AC supply Output Voltage Ranges As per requirement. Output Current Upto 25000 Amps Capacity Up to 500 KVA Duty 15 Minutes On-30 Minutes Off in case of Primary Injection test set and continuous in case of Loading Transformer. Metering Multi range Ampere meter of class 1.5 with CT of class 0.5 are provided on secondary side to indicate Output Current. Protection On-Off Switch with fuse is provided to protect the unit against short circuit, push button to actual and cut of output Housing Each unit is housed in a MS sheet body, supported with angle iron frame. The oil cooled models are housed in suitable MS tank and the control panel is on the tank or as per requiems. Optional (a) Voltmeter
(b) Timer as per requirement
(c) Rubber cable
(d) Zero start interlocking with by pass switch. Termination The output is brought out on suitable Bus Bar/Terminals

Additional Information

Product Code DCFT
Min. Order Quantity one Set(s)
Port Mumbai