Rectifier Transformer


Rectifier Transformer


We have come up with exclusive Rectifier Transformer. Our Rectifier Transformers are meant for continuous use hence they can be air / and oil cooled. We provide electronic controls with our Rectifier Transformers for different functions optional like, current density control, voltage control, temperature, speed control etc. Our Rectifier Transformer is well tested under strict industry norms for high performance and efficiency.

Why Our Rectifier Transformer?

  • Various feature & functions upon request
  • Highest rating available
  • Electronic parameter monitoring


Used For

  • Electroplating
  • Anodizing
  • Chemical processes
  • Power supplies for: magnetic charger, battery charger
  • Copper and silver refining
  • Drawing large generator motor transformer etc

 

» Technical Details

 

Step Down Transformer A double wound transformer is used for supplying high current at low voltage for testing. Current Control A step less Auto Transformer is used for Controlling Output Current from Zero to Maximum. Input Voltage 230/415 Volts single/two/three phase 50Hz. AC supply Output Voltage Ranges As per requirement. Output Current Upto 25000 Amps Capacity Up to 500 KVA Duty 15 Minutes ON-30 Minutes OFF in case of Primary Injection test set and continuous in case of Loading Transformer. Metering Multi range Ampere meter of class 1.5 with CT of class 0.5 are provided on secondary side to indicate Output Current. Protection ON-OFF Switch with fuse is provided to protect the unit against short circuit, push button to actual and cut of output. Housing Each unit is housed in a MS sheet body, supported with angle iron frame. The oil cooled models are housed in suitable MS tank and the control panel is on the tank or as per requiems. Optional (a) Voltmeter
(b) Timer as per requirement
(c) Rubber cable
(d) Zero start interlocking with by pass switch Termination The output is brought out on suitable Bus Bar/Terminals.

Additional Information

Min. Order Quantity one Set(s)